More Views

In Stock for Immediate Shipment.

  • SKUM-T1812A50
  • Price

    Regular Price: $42.00

    Special Price $24.99

  • Manufacturer AMI
  • Size (Approximate): 1.8 x 12"
 

Description


AMI 50 Gallon per Day Home RO Reverse Osmosis Membrane 


AMI 50GPD home RO membrane elements are among the finest in the industry.  With hundreds of thousands of membranes in operation in water filtration systems world-wide, AMI membranes have earned a reputation of delivering consistent, high quality which makes AMI Membranes the natural choice for use in home or office RO systems.  AMI Home RO Membranes are constructed of tap water TFC (thin film composite) membrane material and fit standard residential home RO Housings for point of use systems. 

AMI Membranes are Made in the USA in their ISO 9001:2015 Certified Facility and are 100% Quality and Performance Tested.

Genuine AMI RO Membranes Made in USA NSF Approved ISO Certified

M-T1812A50 is certified to NSF/ANSI 58 for the reduction of Arsenic, Barium, Cadmium, Chromium (Hexavalent), Chromium (Trivalent), Copper, Turbidity, Fluoride, Lead, Radium 226/228, Selenium, and TDS.

 

Specifications for M-T1812A50

  
AMI Part Number: M-T1812A50
Flow Rate: 50 GPD (190 LPD)
Membrane Type: TFC (Thin Film Composite)
Minimum Salt Rejection: 96%*
Stabilized Salt Rejection: 98%*
For Housing: Standard Residential  2" x 12"
Replacement for System: AAA-505, AAA-505P, AAA-506UV, AAA-N50, AAA-RO50W, and nearly any 50 GPD home RO system with a standard housing.
Replaces Membranes:

DOW FilmTec TW30-1812-50
Axeon TF-1812-50
and many more: Check Full List
  

AMI Membranes Product Specifications

Since the presence of free chlorine and other oxidizing agents will cause premature membrane failure, a carbon block filter should be used before this RO membrane element when filtering chlorinated water.
Performance specifications based on 500 ppm tap water, 50 psi (0.35 MPa) applied pressure, 77°F (25°C) feed water temperature, feed water pH 7-8 and 15% recovery. Element permeate flow may vary ± 15%.
*Salt Rejection shown is from internal test data.

 M-T1812A50 Compatibility Information

AMI M-T1812A50 RO is industry-standards style and will fit most RO systems using standard 50 GPD membranes. AMI 50 GPD RO membrane can also be used as direct replacement for the following membrane part numbers.  Note that this list is not complete, as 50 GPD membranes are produced under too many labels to list.  If your model is not listed, check the Membrane Dimensions drawing below against the dimensions of the element you are replacing, or contact us for assistance.

Unsure of your System or Membrane model?
You can use AMI membranes of the same flow in most RO systems by replacing the membrane housing - Available for Purchase Here 
Membrane Housing for Home RO System
If you are unsure of your flow or are changing the flow of your system, replace your system's flow restrictor to one that matches the flow of the new membrane. 
  • Aqua Flow - E50TFC-2, E50TFC-3
  • Axeon - 255-TF-050, TFC, 200359, TF-1812-50
  • Crystal Quest - TFC CQE-RC-04041, TFC/TFM
  • Culligan - TFM-50-A, 00-4015-33, 00401533, 01-0060-98, 4015-33, M-T1812AC50, AC-50, LC-50, 21582, 1224437, AG2012TJF
  • Desal Membranes - TFM-50, 1204694, 1224437, AG2012TJF
  • DOW FilmTec - TW30-1812-50
  • Flow Matic - FMR04J, FMR05G
  • Hague - 200295, 200290
  • Honeywell - RF-63, 01-0060-98
  • Hydrotek - 33001033, TFC50, 21600
  • Intellipure - TF-1812-50, 210206
  • GE Osmonics - TFM-50, 1204694, 4073660, M-T1812A50, T112N-50, GE-RO-TFM-50, 1224437, 21582
  • Osmotik - T112-50
  • Pentair - TLC-50, 555694-00, 1204694
  • Purwater - TFM50EM
  • TGI Pure TopWay Global - MM-TFF45/75
  • Valuetrex - VX-TW30-50D
  • WaterFilters.net - TROM-50-WF, TFC

Features of AMI Home RO Membranes

  • Remove up to 99% of total dissolved solids from water.
  • High Rejection and Reliable Flow Rates
  • Made in the USA
  • Manufactured in our ISO 9001:2015 Certified Facilities
  • 100% Performance and Quality Tested
  • Backed by our Experienced Technical Support Staff
  • High Quality for Consistent and Reliable Performance
  • Uses the most advanced membrane film technology and manufacturing processes
  • Standard dimensions to fit in commonly available housings
  • Certified to NSF/ANSI 58 for the reduction of Arsenic, Barium, Cadmium, Chromium (Hexavalent), Chromium (Trivalent), Copper, Turbidity, Fluoride, Lead, Radium 226/228, Selenium, and TDS.

Applications for AMI Home RO Membranes

  • In the Home for Drinking, Cooking, Pets, and Plants
  • Offices
  • Aquariums
  • Institutions
  • Restaurants
  • Ice Makers
  • Labs
  • Under the Counter/Under the Sink RO
  • Point of use RO Systems

AMI Reverse Osmosis Membranes for Home RO Systems

Physical Dimensions of M-T1812A50:

  

Total Length (L):

11.75 In. (29.85 cm)

Membrane Length (I):

10.0 In. (25.4 cm)

Diameter (D):

1.8 In. (4.57 cm)

  

Buy Now & Ship Today

Stock orders placed by 3:00 PM PT on a business day are shipped the same day.

Shop Our Best Sellers

Have A Question? Let’s Talk.