4"x40" | 97% Salt Rejection | 2,000 GPD | FilmTec NF90 Element

In Stock for Immediate Shipment.
SKU
NF90-4040
$397.72
More Information
Brand DOW Filmtec
 
Compare with Similar Items
Note that DuPont has acquired DOW FilmTec with significant cost increases. We continue to offer DuPont elements but we also recommend AMI Membranes as the preferred alternative. AMI Membranes are Made-In-USA with a large inventory in stock for immediate shipment & are competitively priced.

DOW FilmTec Membrane Elements

DOW FILMTEC™  NF90-4040 Nanofiltration (NF) Membrane Elements for Commercial Systems

The DOW FILMTEC NF90-4040 membrane elements provide high productivity performance while removing a high percentage of salts, nitrate, iron and organic compounds such as pesticides, herbicides and THM precursors. The low net driving pressure of the FilmTec NF90-4040 membrane allows the removal of these compounds at low operating pressures.     DOW FILMTEC NF90-4040 has a fiberglass outer wrap.

DOW FILMTEC NF90-4040 is FDA – 21 CFR 177.2550; Food and Drug Administration Compliant.

Product Specifications

 

FilmTec Membranes are FDA Compliant     Genuine DOW FilmTec Membrane Element   

Common Applications for FilmTec NF90-4040 Nanofiltration Elements:

  • Production of Drinking Water
  • Demineralization in Small Commercial Applications

Benefits of DOW FilmTec Commercial NF Membranes

  • High flux results in high yields
  • Low energy usage reduces power consumption and costs
  • Durable with good cleanability for long element life
  • FilmTec performance and quality
 

Specifications for NF90-4040

   
FilmTec Product: NF90-4040
FilmTec Part Number: 149983
Size (Approximate): 4" Dia. x 40"L
Flow Rate: 2,000 gpd (7.6 m³/d)
Applied Pressure: 70 psig (4.8 bar)
Stabilized Salt Rejection: >97%
Single Element Recovery: 15%
Exterior: Hard Shell Fiberglass
Membrane Type:
 
Polyamide Thin-Film
Composite
   

Permeate flow and salt rejection based:  2,000 ppm MgSOfeed stream, 77°F, 15% recovery, 70 psig.
 

Operating Limits for NF90-4040

   
Maximum Operating Temperature: 113°F (45°C)
Maximum Operating Pressure: 600 psig (41 bar)
Maximum Pressure Drop: 16 psig (0.9 bar)
Maximum Feed Flow Rate: 16 gpm (1.4m³/h)
pH Range, Continuous Operation*: 2-11
pH Range, Short-Term Cleaning**: 1-13
Maximum Feed Silt Density Index: SDI 5
Fere Clorine Tolerance***: <0.1ppm
   

*Maximum temperature for continuous operation above pH 10 is 95°F
**Refer to cleaning guidelines.
***Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, Dow recommends removing residual free chlorine by pretreatment prior to membrane exposure.


Related Products for use with NF90-4040

   
PV4040PWG PVC Membrane Housing Pressure Vessel for 4" x 40" Membrane Element
PV4080PWG PVC Membrane Housing Pressure Vessel for (2) 4"x40" Membrane Elements
PV4040SSAU-316 Stainless Steel Membrane Housing Pressure Vessel for 4" x 40" Membrane Element
PV4080SSAU-316 Stainless Steel Membrane Housing Pressure Vessel for  (2) 4" x 40" Membrane Element
PV4040SSAW-316 Stainless Steel  End-Clamp-Style Membane Housing Pressure Vessels for 4" x 40" Membrane Elements
PV4080SSAW-316 Stainless Steel  End-Clamp-Style Membane Housing Pressure Vessels for (2) 4" x 40" Membrane Elements
PV-IN410 Interconnector Coupler for Installing Multiple Elements in a housing - FilmTec part # 89055.   Includes two o-rings.
   

Physical Dimensions of DOW FilmTec NF90-4040

DOW FilmTec Commercial NF Membrane Drawing  
  INCHES (MM)
A 40.0 (1,016)
B 1.05 (27)
C 0.75 (19) OD
D 3.9 (99)
   

NF90-4040 Fits nominal 4-Inch I.D. pressure vessels.

For more information, please visit this products webpage.